徐工xca2600超起版(优化型)---crane

---改进型号，移除了不属于传奇mod的方块 ---优化了车身结构使得帧数大幅提高 ---优化大臂结构，强度大幅增加有真实的超起拉力系统，稳定性大幅增加随便造没有问题 ————操作顺序1 2 5 6 7 8 9 3 4 1·打开支撑腿 2·放下支撑腿液压杆 3·升起超起臂 4·张开超起臂 5·抬起大臂至50度 6·抬起大臂至80度 7·伸出第一节大臂 8·伸出第二节大臂 9·伸出第三节大臂 ————在放下载具后先用方块将车辆链接至地面，令车轮至少抬离地面至少一个方块的高度 ————如果帧率太低可以在设置内打开垂直同步 （为了做到极致的拟真，帧率只能有一些牺牲，请见谅） （至于有多拟真，可以订阅去游戏里感受纯粹的机械魅力） ---Improved model, removed blocks that are not part of the legendary mod ---Optimized the body structure to greatly increase the frame rate ---Optimized the arm structure, greatly increased the strength, with a real super-lifting pulling system, greatly increased stability, no problem with any construction ————Operation sequence 1 2 5 6 7 8 9 3 4 1·Open the support legs 2·Lower the support leg hydraulic rod 3·Raise the super-lift arm 4·Open the super-lift arm 5·Lift the arm to 50 degrees 6·Lift the arm to 80 degrees 7·Extend the first section of the arm 8·Extend the second section of the arm 9·Extend the third section of the arm ————After putting down the vehicle, first use the block to connect the vehicle to the ground, so that the wheels are at least lifted off the ground by at least one block ————If the frame rate is too low, you can turn on vertical synchronization in the settings (In order to achieve the ultimate simulation, the frame rate can only be sacrificed a little, please forgive me) (As for how realistic it is, you can subscribe to experience the pure mechanical charm in the game)